Vietnamese (VN)English (UK)

Aquaculture


ENCHOICE® A-ZYME IN AQUACULTURE
Biodegrades organic materials such as plants, algae, animal wastes, feed waste, other suspended solids; reduces pond sludge, controls odors and improves the quality of water.
Reduces the levels of undesirable organic chemical compounds such as NH3, H2S, NOx, CO2 in the water.
Reduces the amounts of antibiotics needed
Cleaner pond environment contributes to improving crop mortality rates.
Stabilizes pH, improves water clarity, decreases BOD, COD, reduces algae, improves the dissolved oxygen levels in the water contributing to better general health, increased appetite, and accelerated growth cycles
Stimulates the development of beneficial micro-organisms.
Increases the effectiveness of feed programs, reducing crop harvesting periods.
Improves crop survival rates, and improves production tonnage values.
Reduces pond sludge and pond preparation costs. Saves time and labor.
Decreases costs of using antibiotics and chemicals in pond treatments.
DOSAGE OF ENCHOICE A-ZYME FOR SHRIMP
Concentration 0.1 – 0.2 ppm, equivalent to 500 – 1000 ml of product for 5,000 m3 water.
APPLICATION PROCEDURE
Mix the product into a container of water and spray uniformly over the surface of the pond using the pond aeration system to disburse the mixture. Suggested times of the day to apply A-zyme: 6 am - 8 am; 4pm – 6pm.
SUGGESTED APPLICATION FREQUENCY
First apply A-zyme to the pond 03 days before the introduction of the shrimp, with the concentration set at 0.1ppm.
During the first month: 1 time/month from 20th – 25th day of the month with the concentration set at 0.1ppm.
During the second month: 2-3 times/month approximately 10 – 15 days apart depending on the contamination of the water with concentrations of 0.1 – 0.2 ppm
From the third month on: 3–4 times/month approximately 7–10 days apart with concentrations of 0.2ppm.
ADDITIONAL NOTES FOR USING A-ZYME
ENCHOICE@ A-zyme can be used immediately after mixing the application solution. The product does not need to be “activated”.
When mixing the solution, add the water in first, and then the product to avoid excessive foaming
Shake well before using this product.
Do not exceed the prescribed concentration.
 
 
Picture 196
 
Picture 197
 
Picture 098
 
Top